AME News

Homecare Medical Equipment Archives

Adjustable Bathroom Safety Pole with Curved Grab Bar

Curved Security Pole (white) with Curve Grab Bar provides safety in the Bathroom or ANY room in the house

Two products in 1 Floor-to-ceiling pole with pivoting Curve Grab Bar that locks in place at 8 different positions every 45 degrees. Adjustable fits ceiling heights 7 feet to 9 feet.

Bathroom Safety Pole grab bar

Click here for more Medame products

Portable. Main pole easily separates into two 53" pieces making it easy to transport

Adaptable. No need for wall mounts it can be installed in virtually any area of a room exactly where it is needed.

Quick Assembly Steps:
1. Attach top and bottom pieces using included pins.
2. Slide the two 53” pieces together.
3. Use included tool to tension mount between floor

Make a secure support for sitting, standing or for transferring a senior with mobility problems to a walker, wheelchair or other mobility device. Because wall mounts are not needed, it can be moved to any room in your home whenever necessary. The slim design makes for an easy fit in tight spaces. It can be installed between the bathtub and the toilet, placed at your bedside, or conveniently, next to a sofa or chair.

The Grab Bar is created with 4 vertical bars, allowing the user to gradually climb to a standing position using a hand-over-hand technique. The Curved Grab Bar also pivots, locking in place at eight different points (every 45 degrees). Installation is simple and secure. The floor-to-ceiling Security Pole is tension mounted and is packaged with its own wrench so no other tools are required. The Security Pole can be permanently installed with the wood screws that are included, if the user desires.

Frequently Asked Questions:
• How is it installed? The pole is tension mounted between the floor and the ceiling. It is not necessary to attach the Security Pole to the floor or the ceiling, but screws have been included for permanent installation.
• What tools are needed for assembly? A wrench is included with the Security Pole & Curved Grab Bar - no other tools are needed for assembly.
• Does it damage the floor and ceiling? The Security Pole is fitted with rubber pads at the top and the bottom, to protect the ceiling and the floor.
• What ceiling heights does it accommodate? 7 foot to 9 foot ceilings.

For Customer Service please email: Steve@MedAME.Com Or call: 619-462-4290

 

 


1100-W

SafetySure Transfer Gait Belt - Small

Are you worried about dropping and breaking the bones of a handicapped loved one but can't afford an expensive electronic lift or have trouble handling hydrollic Hoyer lifts?

Sometimes helping a loved one who has trouble with moving on their own can be a difficult and stressful situation.
safetysure gait belt is Easy to Put on

The SafetySure Transfer Belt is the answer to many of your problems.

With the Safety Sure Transfer Belt you can easily help your loved one get up or sit down, help them up from the floor, transfer between bed and wheelchair, or wheelchair and toilet or car.

Easily provide support for patients who can be unstable when walking. The fix lock belt allows you to adjust or retighten the belt on the patient while they are standing without having to open it.

The main advantage to the belt are it numerous hand grips.

To See MedAme eBay Store & Buyer Feed Back Click Here. Buy it now for only $57.70 (Free Shipping!)

Small Belt Specifications:
- Width: 4"
- Length: 3'Transfer Gait Belts
- Thickness: 3/8"
- Fits Waist: 23" - 36"
- Number of Handles:4
- Product Weight: 3/4 lb

Notes:
Shipping shown is for Continental US
Add $12.50 to ship to Canada

The Safety Sure Transfer Belt waist size ranges between 23" to 60", depending on the size.(Please measure girth in inches see "Gait Belts" category for Large and Medium.)

Positioning
SST Belt is placed low on the waist. It is pulled tight by grabbing the two end pieces and then pulling the belt tight around the waist (fig.1). Remember, the patient's girth is greater when sitting. It is important that the belt is comfortably tight. The belt is removed by pressing against the center of the buckle.

Helping a patient to stand or sit
There are many different ways to use the SST Belt to assist a patient to stand or sit. Think of the direction of the transfer and follow the body's natural movement pattern (fig. 2 - 6). Either the patient, the helper, or both can wear a SST Belt.

Helping a patient up from the floor
SST Belt is extremely useful in helping someone up from the floor. Do not lift straight upward, but follow a natural movement pattern. The patient is then able to obtain support from leaning against or gripping on to a chair, bed or table (fig. 7)

Transfer between bed and wheelchair
SST Belt is of considerable help in performing transfers from a bed to a wheelchair; the patient can be sitting or standing (fig. 8).

Transfer between a wheelchair and a car
For transfers into a car, a SST Board can be used in combination with a SST Belt (fig. 9). Make sure the patient does not end up sitting between the wheelchair and the car seat. In the case of a passive patient, a SST Sling may also be used underneath him/her. This makes it easier for the helper to pull the patient into the car and is more comfortable for the patient.Transfer belt help out of car

Help during toilet visits
When a patient needs to use the toilet, it is important to plan ahead and keep the safety of both the patient and the helper in mind (fig. 10). If there is not enough bathroom space, use a commode outside the bathroom. If the patient is heavy, use two helpers (fig. 11).

Support when walking
When you are supporting someone who is ambulatory, keep one arm around the patient for protection (fig. 12). Always hold the patient close to you. This enables you to react more quickly if the patient needs help and reduces the amount of strain on yourself. SST Belt provides good grips and a comfortable way of supporting a patient.

Protecting patient who is unstable when walking
When there is a risk that the patient could fall over, it is important to hold him/her close to you to prevent him/her from slipping down. Allow the patient to slide down along the outside of your leg (fig. 13).Transfer Belt Helps in and out of wheel chairs

  • Dimensions: Length 3' x Width 4"
  • Thickness: 3/8"
  • Weight: 1/2 lb.
  • Waist size: 23" - 36"
  • Handles: 4

 

 

walking belts help you prevent falls
Safety Sure Gait Home Patient Transfer Belt now on Ebay!

 

 

 

 

 

 

gait belt

6035-small

SafetySure Transfer Gait Belt - Medium

Are you worried about dropping and breaking the bones of a handicapped loved one but can't afford an expensive electronic lift or have trouble handling hydrollic Hoyer lifts?

Sometimes helping a loved one who has trouble with moving on their own can be a difficult and stressful situation.
safetysure gait belt is Easy to Put on

The SafetySure Transfer Belt is the answer to many of your problems.

With the Safety Sure Transfer Belt you can easily help your loved one get up or sit down, help them up from the floor, transfer between bed and wheelchair, or wheelchair and toilet or car.

Easily provide support for patients who can be unstable when walking. The fix lock belt allows you to adjust or retighten the belt on the patient while they are standing without having to open it.

The main advantage to the belt are it numerous hand grips.

To See MedAme eBay Store & Buyer Feed Back Click Here. Buy it now for only $57.70 (Free Shipping!)

Medium Belt Specifications:
- Width: 4"
- Length: 3'Transfer Gait Belts
- Thickness: 3/8"
- Fits Waist: 23" - 36"
- Number of Handles:4
- Product Weight: 3/4 lb

Notes:
Shipping shown is for Continental US
Add $12.50 to ship to Canada

The Safety Sure Transfer Belt waist size ranges between 23" to 60", depending on the size.(Please measure girth in inches see "Gait Belts" category for Large and Small.)

Positioning
SST Belt is placed low on the waist. It is pulled tight by grabbing the two end pieces and then pulling the belt tight around the waist (fig.1). Remember, the patient's girth is greater when sitting. It is important that the belt is comfortably tight. The belt is removed by pressing against the center of the buckle.

Helping a patient to stand or sit
There are many different ways to use the SST Belt to assist a patient to stand or sit. Think of the direction of the transfer and follow the body's natural movement pattern (fig. 2 - 6). Either the patient, the helper, or both can wear a SST Belt.

Helping a patient up from the floor
SST Belt is extremely useful in helping someone up from the floor. Do not lift straight upward, but follow a natural movement pattern. The patient is then able to obtain support from leaning against or gripping on to a chair, bed or table (fig. 7)

Transfer between bed and wheelchair
SST Belt is of considerable help in performing transfers from a bed to a wheelchair; the patient can be sitting or standing (fig. 8).

Transfer between a wheelchair and a car
For transfers into a car, a SST Board can be used in combination with a SST Belt (fig. 9). Make sure the patient does not end up sitting between the wheelchair and the car seat. In the case of a passive patient, a SST Sling may also be used underneath him/her. This makes it easier for the helper to pull the patient into the car and is more comfortable for the patient.Transfer belt help out of car

Help during toilet visits
When a patient needs to use the toilet, it is important to plan ahead and keep the safety of both the patient and the helper in mind (fig. 10). If there is not enough bathroom space, use a commode outside the bathroom. If the patient is heavy, use two helpers (fig. 11).

Support when walking
When you are supporting someone who is ambulatory, keep one arm around the patient for protection (fig. 12). Always hold the patient close to you. This enables you to react more quickly if the patient needs help and reduces the amount of strain on yourself. SST Belt provides good grips and a comfortable way of supporting a patient.

Protecting patient who is unstable when walking
When there is a risk that the patient could fall over, it is important to hold him/her close to you to prevent him/her from slipping down. Allow the patient to slide down along the outside of your leg (fig. 13).Transfer Belt Helps in and out of wheel chairs

  • Dimensions: Length 3' x Width 4"
  • Thickness: 3/8"
  • Weight: 1/2 lb.
  • Waist size: 23" - 36"
  • Handles: 4

 

 

walking belts help you prevent falls
Safety Sure Gait Home Patient Transfer Belt now on Ebay!

 

 

 

 

 

 

gait belt

6035-medium

SafetySure Medical Transfer Belt-Large

Are you worried about dropping and breaking the bones of a handicapped loved one but can't afford an expensive electronic lift or have trouble handling hydrollic Hoyer lifts?

safetysure gait belt is Easy to Put on Sometimes helping a loved one who has trouble with moving on their own can be a difficult and stressful situation.

The SafetySure Transfer Belt is the answer to many of your problems.

With the Safety Sure Transfer Belt you can easily help your loved one get up or sit down, help them up from the floor, transfer between bed and wheelchair, or wheelchair and toilet or car.

Easily provide support for patients who can be unstable when walking. The fix lock belt allows you to adjust or retighten the belt on the patient while they are standing without having to open it.

The main advantage to the belt are it numerous hand grips.

To See MedAme eBay Store & Buyer Feed Back Click Here. Buy it now for only $57.70 (Free Shipping!)

Large Gait Belt Specifications:
- Width: 4"
- Length: 5'Transfer Gait Belts
- Thickness: 3/8"
- Fits Waist: 42" - 60"
- Number of Handles:7
- Product Weight: 1 lb

Notes:
Shipping shown is for Continental US
Add $12.50 to ship to Canada
California Sales Tax Applies

The Safety Sure Transfer Belt waist size ranges between 23" to 60", depending on the size.

(Please measure girth in inches see "Gait Belts" category for Small and Medium.)

 

Positioning
SST Belt is placed low on the waist. It is pulled tight by grabbing the two end pieces and then pulling the belt tight around the waist (fig.1). Remember, the patient's girth is greater when sitting. It is important that the belt is comfortably tight. The belt is removed by pressing against the center of the buckle.

Helping a patient to stand or sit
There are many different ways to use the SST Belt to assist a patient to stand or sit. Think of the direction of the transfer and follow the body's natural movement pattern (fig. 2 - 6). Either the patient, the helper, or both can wear a SST Belt.

Helping a patient up from the floor
SST Belt is extremely useful in helping someone up from the floor. Do not lift straight upward, but follow a natural movement pattern. The patient is then able to obtain support from leaning against or gripping on to a chair, bed or table (fig. 7)

Transfer between bed and wheelchair
SST Belt is of considerable help in performing transfers from a bed to a wheelchair; the patient can be sitting or standing (fig. 8).

Transfer between a wheelchair and a car
For transfers into a car, a SST Board can be used in combination with a SST Belt (fig. 9). Make sure the patient does not end up sitting between the wheelchair and the car seat. In the case of a passive patient, a SST Sling may also be used underneath him/her. This makes it easier for the helper to pull the patient into the car and is more comfortable for the patient.Transfer belt help out of car

Help during toilet visits
When a patient needs to use the toilet, it is important to plan ahead and keep the safety of both the patient and the helper in mind (fig. 10). If there is not enough bathroom space, use a commode outside the bathroom. If the patient is heavy, use two helpers (fig. 11).

Support when walking
When you are supporting someone who is ambulatory, keep one arm around the patient for protection (fig. 12). Always hold the patient close to you. This enables you to react more quickly if the patient needs help and reduces the amount of strain on yourself. SST Belt provides good grips and a comfortable way of supporting a patient.

Protecting patient who is unstable when walking
When there is a risk that the patient could fall over, it is important to hold him/her close to you to prevent him/her from slipping down. Allow the patient to slide down along the outside of your leg (fig. 13).Transfer Belt Helps in and out of wheel chairs

  • Dimensions: Length 3' x Width 4"
  • Thickness: 3/8"
  • Weight: 1/2 lb.
  • Waist size: 23" - 36"
  • Handles: 4

 

 

walking belts help you prevent falls
Safety Sure Gait Home Patient Transfer Belt now on Ebay!

 

 

gait belt

6035-Large

  

Welcome! Please join our community today.